,

LS8033

Glass Filled Polypropylene


Horizontal / 1/2″ National Pipe Thread external fitting

 

Click to download full series data sheet

Click to download Compliance Document

Quantity of item required. Cable is quoted in metres.

Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation. i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

Mechanical Specifications

  • Mounting position: Horizontal models +/- 30 degrees from horizontal
  • Minimum operating angle: Horizontal models 5 degrees from mounting angle
  • Maximum release angle: Horizontal models 40 degrees from mounting angle
  • Shock*: 50g for 11 milliseconds duration
  • Vibration*: 35g up to 500 Hz
  • Nominal cable length: 0.5 metre

*Reed switch only

Max. Current Example: For 15 Watts 230 Volts = 65mA

COMPLIANCE DOCUMENT:

Gentech Float Switches Certificate of Compliance

Material: Glass Filled Polypropylene

Mounting Position: Horizontal

Mounting Method: 1/2" National Pipe Thread external fitting

Maximum Switching Voltage: 100(VDC) 250 (VRMS)

Maximum Switching Current (AMPS): 1.0

DC Contact Rating (Watts)#: 15

Minimum Breakdown Voltage (VDC): 800

Initial Contact Resistance (OHMS): 0.25

 

Recently viewed products