Traffic Signals Gel filled instrumentation cables for traffic signal installations.
- UV resistant
- Flame retardant
- Heat, oil and chemical resistant (see Chemical Rating Chart).
Conductor Annealed plain copper stranded (Class 2).
Cable Filler Transparent LDPE.
Water Block Material Gel filled with water block tape to AS/NZS 2276.2.
TCGEL-ES (Individual Pair Screen) PET+ Aluminium/Polyster tape screen applied with 7/0.25mm TC drain wire complete with gel compound.
TCGEL (Overall Screen) Aluminium/Polyster tape screen applied with 7/0.25mm TC drain wire and gel compound.
Screening Collective shield of aluminium/polyester foil complete with tinned copper drain wire (7/0.25mm tinned copper).
Sheath PVC 4V-75.
Operating Temperature Range Fixed -20°C to 70°C.
Maximum Conductor Temperature 70°C (Current ratings are based on 30°C air temp. See technical section for de-rating factors).
Max. Conductor Resistance 13.6 Ω/kM.
Min. Insulation Resistance 20G Ω/kM @ 500Vdc.
Mutual Capacitance 65-80nF/kM @ 1kHz.
Max. Water Penetration 3% Maximum variation of C3 between cores.
Rated Voltage 300V.
Minimum Bending Radius 12 x cable diameter.
Sheath Colour Black.
Standard Core Colour
PAIR 1: Blue, Blue with White Stripe.
PAIR 2: Orange, Orange with White Stripe.
PAIR 3: Green, Green with White Stripe.
PAIR 4: Black, Black with White Stripe.
NOTE: THE CABLE HAS A PAIR TO NUMBER MARKING ON THE SHEATH FOR IDENTIFICATION PURPOSES.
Relevant Standards AS/NZS 2276.2 (exception to overall diameter for 2 & 4 pair cables), AS/NZS 1125, AS/NZS 1660, AS/NZS 1049 and ROHS Compliant.