Glanding For watertight glanding of screened circular cables.
VSD Used for glanding copper braided screened VSD cables at both input (power source to variable speed drive) and output (variable speed drive to motor) ends for VSD applications.
- Halogen free
- Silicone free
- Phosphorous free
- Cadmium free
- Self extinguishing
Material Bright nickel plated extruded brass gland body and compression head (Brass BS EN 50262 1999 / Brass extrusion BS 2874 CZ121 3Pb).
Seal PCP (Neoprene) rubber.
O-Ring PCP (Neoprene) rubber.
Insert Polyamide 6 traction relief clamping insert.
Operating Temperature Range -40°C to 80°C. Up to 100°C for short periods.
Protection Class Water rating IP68. Pressure rating 5 bar.
- Remove plastic insert from base of gland
- Trim screen to approximately 30% density and partially fold screen back up over the insert
- Push insert back into base of gland so the screen will contact the lip at the base of the gland for earthing
- To establish an electrically conductive connection to bare or painted metal surfaces or enclosures – use an LNEMC LOCKNUT which has cutting teeth to bite into the metal