Materials and Handling Systems Suitable for use in indoor and outdoor crane and festooning systems, conveyor systems and energy chains.
Confined Spaces With its flat configuration, this cable can be laid in areas subject to space confinements.
Pumping Suitable for permanent submersion up to 500 metres for pump connection.
Variable Speed Drives Designed for the connection of AC Variable Speed Drives (0.6/1kV cables) or where a flexible EMC screened power cable is required.


  • Tensile load up to 15 N/mm²
  • Travel speed 180 metres per minute
  • High flexibility
  • UV stabilised
  • Flame retardant
  • Heat, oil and chemical resistant (refer to chemical chart. Resistant to environmental factors like oxidation, ozone and sunlight
  • Very good behaviour to variations of outdoor temperatures
  • Suitable for permanent submersion to 200 metres


Conductor Annealed fine wires of plain electrolytic copper stranded for HIGH flexibility.
Insulation EPR.
Screening Copper screened braiding, 85% minimum coverage (Individually screened cores).
Sheath PCP.


Operating Temperature Range Fixed -40°C to 80°C / Flexing -25°C to 80°C.
Maximum Conductor Temperature 80°C (Current ratings are based on 30°C air temp. See technical section for de-rating factors).
H05 Rated Voltage Uo/U 300/500v.
H05 Max AC Operating Voltage Uo 318v.
H07 Rated Voltage Uo/U 0.6/1kV.
H07 Max AC Operating Voltage Uo 0.7kV.
Minimum Bending Radius Flexing 10 x cable height.
Sheath Colour Black.
Standard Core Colours
4 Core – Brown, Black, Grey, Green/Yellow.
5 Core – Blue, Brown, Black, Grey, Green/Yellow.
Multi Core – Black Numbered, Green/Yellow.
Relevant Standards DIN VDE 0295, IEC 60332-1, generally to AS/NZS 5000.1, C E Directive 2006/95/EC, ROHS Compliant.