VSD Connection Designed for the connection of AC Variable Speed Drives (VSD) or where a flexible EMC screened cable is required. These cables are flexible for fixed installation as well as occasional flexing without tensile load.
RFI & EMI Protection With double screening (CBS & foil tape) and split interstitial earth cores (6mm² and above), this cable has optimum screening performance of low frequency and electromagnetic output.


  • Helps avoid reactance with other devices outside the plant
  • UV stabilised
  • Flame retardant
  • Moisture resistant
  • Resistant to environmental factors such as oxidation, ozone and sunlight
  • To be earthed using an EMC compatible gland
  • Heat, oil and chemical resistant (see Chemical Rating Chart)


Conductor Annealed plain copper stranded high flexibility (Class 5).
Insulation X-90.
Screening 85% tinned copper braid screen c/w 100% foil screen coverage.
Sheath SPVC V-90.


Operating Temperature Range Fixed -5°C to 90°C / Flexing -20°C to 90°C.
Maximum Conductor Temperature 90°C (Current ratings are based on 30°C air temp. See technical section for de-rating factors).
Rated Voltage Uo/U 0.6/1kV.  
Max AC Operating Voltage Uo 0.7kV.
Minimum Bending Radius Fixed 15 x cable diameter / Flexing 10 x cable diameter.
Sheath Colour Black.
Standard Core Colours Red, White, Blue, Green/Yellow.
Relevant Standards AS/NZS 5000.1, AS/NZS 1125, AS/NZS 3808, IEC 60332-1, ROHS Compliant.


Supplier Declaration of Conformity – SDoC AS/NZS 5000.1