VSD Connection Designed for the connection of AC Variable Speed Drives (VSD) or where a flexible EMC screened cable is required. These cables are flexible for fixed installation as well as occasional flexing without tensile load.
RFI & EMI Protection With double screening (CBS & foil tape) and split interstitial earth cores (6mm² and above), this cable has optimum screening performance of low frequency and electromagnetic output.
Pumping Suitable for permanent submersion up to 500 metres.


  • Extra durable rubber sheath
  • Prevents reactance with other devices outside the plant
  • UV stabilised
  • Flame retardant
  • Water and moisture resistant
  • Resistant to environmental factors such as oxidation, ozone and sunlight
  • To be earthed using an EMC compatible gland
  • Suitable for permanent submersion to 500 metres
  • Heat, oil and chemical resistant (see Chemical Rating Chart)


Conductor Annealed plain copper stranded high flexibility (Class 5).
Insulation Black sheathed cables are up to 6.0mm² XLPE X-90, 10mm² and above and 5 core EPR.
Screening 3 and 4 core up to 4.0mm² aluminium / mylar tape plus tinned copper braid, 4 core 6mm² and above tinned copper braid and split earth cores, 5 core aluminium / mylar tape plus tinned copper braid (all copper braids are minimum 85% coverage plus either aluminium / mylar foil tape or split interstitial earth cores to give even greater EMC protection).
Sheath Black up to 6.0mm² NBR, Black 10mm² and above and 5 core CPE.


Operating Temperature Range Fixed -40°C to 90°C / Flexing -20°C to 90°C.
Maximum Conductor Temperature 90°C. (Current ratings are based on 30°C air temp. See technical section for de-rating factors).
Rated Voltage Uo/U 0.6/1kV.
Max AC Operating Voltage Uo 0.7kV.
Minimum Bending Radius Fixed 7.5 x cable diameter / Flexing 15 x cable diameter.
Sheath Colour  Black.
Standard Core Colours  
3 Core – Red, Black, Green/Yellow.
4 Core – Red, White, Blue, Green/Yellow.
5 Core – Red, White, Blue, Black, Green/Yellow.
Relevant Standards IEC 60332-1, AS/NZS 5000.1, AS/NZS 1125, AS/NZS 3008, ROHS Compliant.


Supplier Declaration of Conformity – SDoC AS/NZS 5000.1