with swivel

The RG 7 RUNPOGLIDER (guiding head) with front RTG Ø 6 mm thread is optimally suited for the multifunctional camera developed by RUNPOTEC. This allows the RC2 inspection camera to be adapted to various fiberglass rods or to the RUNPOSTICKS. Of course the RUNPOGLIDER front thread can also be used as a viewfinder with extremely good bending and sliding properties and high breaking load with all RUNPOTEC RTG Ø 6 mm threads. Also all RUNPOTEC cable pulling grip (sock) with RTG Ø 6 mm thread can be attached. The enclosed eyelet also allows for immediate pulling in of cables.

The post RG7 guiding head with front thread RTG Ø 6mm appeared first on Firstflex.

for cable pulling system with RTG Ø 6 mm

Extensive accessory set for RUNPOSTICKS consisting of: Ball chain: In combination with the magnet, targeted locating or guiding of the chain to wall openings is possible.
Catch hook: To “fish” or pull in various cables or lines. Magnet: Can hold metal objects of up to 2.5 kg. Stainless steel eyelet including ring: Steel ring can be located or “fished” with the magnet. High cable capacity. Connecting thread: Serves as transition from internal thread to external thread to connect all accessories or eyes and hooks.
Optimal area of application: suspended ceilings, cable shafts, hollow walls, retroactive wiring of non-routed cables, underfloor shafts, bushings etc

The post RUNPOSTICKS accessories set 5-parts appeared first on Firstflex.

for cable pulling system with RTG Ø 6 mm

The catch hook is mainly used in combination with the RUNPOSTICKS to catch cables or wires. The catch hook is also suitable in combination with the RC2 inspection camera. Can also be used as a catching set in combination with the functional glider (Art.No. 20468) for tight bends.

The post Fishing hook 6mm thread stainless steel appeared first on Firstflex.

for cable pulling system with RTG Ø 6 mm

All catch hooks have been developed primarily for the RUNPOSTICKS in order to cope with the most varied situations in cable installation. The hooks can also be used for all fiberglass rods by RUNPOTEC (GF3 – GF15). Optimally suited: To catch loose pull-in straps or pull them towards you. To fish for cables or pipes that are in corners or against walls. As a small variant to the RUNPOTEC sliding hook to glide over various obstacles and fish for cables or pipes.

The post Fishing hook Set 4 pieces, 6mm thread stainless steel appeared first on Firstflex.

for cable pulling systems with RTG Ø 6 mm thread

Accessories for RUNPOSTICKS – 1x plastic coated steel cable 0.5 m length with RUNPOTEC RTG Ø 6 mm thread and starting bulb for magnet adhesion – holding force 1,5 kg. In combination with the ball magnet it is possible to locate or guide the steel rope to wall openings.
Optimal area of application: suspended ceilings, cable shafts, hollow walls, retroactive wiring of non-routed cables, underfloor shafts, bushings, loose sleeve connections etc.

The post Drag rope 0.5m + magnet starting head appeared first on Firstflex.

for fiberglass rod Ø 3mm, 4,5mm and 6mm

Practical as a fixing variant, e.g. for attaching cable pulling grip (sock), ropes, cables etc. Alternative to eyelets => higher cable capacity. Suitable for GF3, RUNPOSTICKS, fiberglass rods Ø 4.5 mm and Ø 6 mm.

RUNP20427 pull loop Ø 2mm
RUNP20428 pull loop Ø 1.5mm

The post Pull loop stainless steel rope appeared first on Firstflex.

Accessories for cable pulling systems

Consists of 2 x initial bulbs for magnetic adhesion, 1 x magnetic ball Ø 10 mm with 1,5 kg holding force and 1 x magnetic ball Ø 14 mm with 2,9 kg holding force. Is screwed onto the tip of two push-in systems and can also be used as a catching set or for “fishing” with smaller pipe cross-sections (electric pipe Ø 16, 20, 25, 32 mm).

The post Magnet fishing-set 4-part 1.5 kg – 2.9 kg appeared first on Firstflex.

for fiberglass rod Ø 4,5, 6 mm, RUNPOSTICKS

For attaching cables, pulling wires or pulling ropes. Shackle for fiberglass rod Ø 4.5 mm, 6 mm or RUNPOSTICKS.

The post Shackle with RTG Ø 6 mm thread appeared first on Firstflex.

for fibreglass rods Ø 4,5 mm and 6 mm

For simplified sliding or rolling in empty pipes. The roller is compatible with fibreglass rod Ø 4.5 mm, 6 mm or for the RUNPOSTICKS. For RUNPOTEC RTG Ø 6 mm thread.

The post Roller Ø 24 mm with thread RTG Ø 6 mm appeared first on Firstflex.

for horizontal cable pulling with the CW 800 E capstan winch

The connecting swivel is used to connect RUNPOTEC polyester pulling ropes with the cables to be pulled or the deployed pulling die and to ensure twist compensation. Ideally suited in combination with the RUNPOTEC CW 800 E capstan winch.
Made of stainless steel, with the highest quality ball bearings, make the connecting swivel from RUNPOTEC completely corrosion-free and thus one of the highest quality products on the market.
Safety instructions: Not suitable for vertical cable pulling, must not be used to carry or lift loads or persons.

The post Connection swirl with swivel appeared first on Firstflex.

Operational area: RUNPOTEC cable lubricant GEL reduces the frictional resistance enormously, thus making it easier to pull cables and wires into electrical installation pipes and protecting them from cable damage. Application: Apply RUNPOTEC cable lubricant GEL to the cable or on the inside of the pipe. Also highly effective for the pushing in with cable pushing systems. Product features: Non-flammable, reduces frictional resistance, temperature resistant up to 85 °C, improved sliding effect, silicone-free, water-soluble, non-corrosive, no sticking, skin-friendly, biodegradable. Dissolves without residue. Caution: Seal after use, store in a cool and dry place. Contact with live parts must be avoided.

The post Cable lubricant GEL 1000g appeared first on Firstflex.