optimal for pipe inner diameter 9 mm – 32 mm

The RP5 – RUNPOTEC Polyester Ø 5.5 mm is a cable pulling tool without a metre counter. The triple-twisted special plastic tape with a diameter of 5.5 mm has an even better shearing effect than the 3 mm fiberglass rod; the frictional resistance is only half the normal value due to spot contact. The patented RG7 guiding head with swivel Ø 5.5 mm (pressed at the beginning and end of the tape) allows overcoming tight radii (bending radius 15 mm). The RP5 – RUNPOTEC Polyester Ø 5.5 mm is stored in a jobsite suitable and robust storage box with an ergonomic carrying handle.

The post RP5 cable pulling tool without digital metre counter 30m appeared first on Firstflex.

for pipe inner diameters 5 – 40 mm

The GF3 SLIM – Fibreglass rod Ø 3 mm is a cable pulling tool including a digital metre counter (for determining the length of pipes/cables or for creating cable lists). With a maximum diameter of just Ø 4.5 mm, it is ideal for retrofitting occupied pipes or laying fiber optic cables (FTTH – Fiber To The Home). The fibreglass rod Ø 3 mm with patented RG4.5 guide head including swivel is stored in an extremely shock-resistant plastic box. The unit of measurement of the metre counter can be changed from Metric (m) to Imperial (ft).

The post GF3 Slim cable pulling tool incl. digital metre counter, fibreglass rod Ø 3 mm 30m appeared first on Firstflex.

for pipe inner diameter 9 – 45 mm

GF3 – Cable pulling tool incl. digital metre counter, glass fibre rod Ø 3 mm with kink protection ending joint (internal thread RTG Ø 6 mm) and patented guiding head with twist adjustment (2 x external thread RTG Ø 6 mm). Stowed in a shock-proof plastic box. The box is splash-water and dust-proof, extremely shock-proof and therefore ideally suited for the construction site. The GF3 plastic box can be opened with only a single screw for service work. The glide-back protection prevents the fibreglass rod from accidentally slipping back into the box.

The post GF3 Cable pulling tool incl. digital metre counter, fibreglass rod Ø 3 mm appeared first on Firstflex.

cable pulling aids for non guided pipe lines

The new basalt technology allows extreme bending radii, however, the rods retain high dimensional stability. All connections have a RUNPOTEC RTG Ø 6 mm thread, have no butt edges or thread transitions. Objects weighing up to 2.5 kg can be held with the magnet. In combination with the magnet, the ball chain enables targeted locating or guiding to wall openings. In addition, the Comfort package includes the special sliding hook and can easily overcome obstacles up to 8 cm high thanks to the tilt function. The shockproof LED lamp also included has a very high luminosity and extremely long illumination time due to its AAA Duracell battery.

The post Runposticks comfort set (19 parts) appeared first on Firstflex.

Ideal in combination with XB 500 T, XB 500 and XB 300

Thanks to new basalt technology, the most extreme bending radii are possible, but the rods remain dimensionally stable. No rusting – thanks to stainless steel connections, no abutting edges. The uniform RUNPOTEC thread RTG Ø 6 mm enables a wide variety of combinations. All accessories can be screwed on without an additional adapter. Excellent in combination with the XB 500 T, XB 500 and XB 300. The two RUNPOSTICKS can be easily stored in the lid of the XB 500 T or XB 500 and are therefore always with you and ready to hand.

The post Runposticks red hard 2 x 410mm appeared first on Firstflex.

cable pulling winch for horizontal cable pulling

The CW 800 E capstan winch is ideally suited for horizontal pulling of one or more cables. Where several persons are needed for higher pulling loads on many sites, one person is sufficient to pull in the cables with the CW 800 E capstan winch by RUNPOTEC with a choice of 800 kg or 400 kg. The capstan winch can be fixed via the mounting holes or attached to solid objects with the enclosed strap. The trolley mounting rail also offers a very practical fastening option.

The post CW800E capstan winch incl. steel trolley mounting rail and strap appeared first on Firstflex.

for horizontal cable pulling with CW 800 E capstan winch

RUNPOTEC polyester pulling ropes are optimally suited for horizontal cable pulling with the RUNPOTEC CW 800 E capstan winch. RUNPOTEC recommends using the connecting swirl with swivel for horizontal cable pulling. It reduces frictional resistance and protects the cable and the feed system. The reel allows controlled winding and unwinding of the rope. In addition, the rope is perfectly stowed away and ready for use at any time. The extendable adjustable feet allow increased stability and have an integrated storage compartment on both sides.

The post Pulling rope Ø 10 mm incl. reel appeared first on Firstflex.

with swivel

The RG 7 RUNPOGLIDER (guiding head) with front RTG Ø 6 mm thread is optimally suited for the multifunctional camera developed by RUNPOTEC. This allows the RC2 inspection camera to be adapted to various fiberglass rods or to the RUNPOSTICKS. Of course the RUNPOGLIDER front thread can also be used as a viewfinder with extremely good bending and sliding properties and high breaking load with all RUNPOTEC RTG Ø 6 mm threads. Also all RUNPOTEC cable pulling grip (sock) with RTG Ø 6 mm thread can be attached. The enclosed eyelet also allows for immediate pulling in of cables.

The post RG7 guiding head with front thread RTG Ø 6mm appeared first on Firstflex.

for cable pulling system with RTG Ø 6 mm

Extensive accessory set for RUNPOSTICKS consisting of: Ball chain: In combination with the magnet, targeted locating or guiding of the chain to wall openings is possible.
Catch hook: To “fish” or pull in various cables or lines. Magnet: Can hold metal objects of up to 2.5 kg. Stainless steel eyelet including ring: Steel ring can be located or “fished” with the magnet. High cable capacity. Connecting thread: Serves as transition from internal thread to external thread to connect all accessories or eyes and hooks.
Optimal area of application: suspended ceilings, cable shafts, hollow walls, retroactive wiring of non-routed cables, underfloor shafts, bushings etc

The post RUNPOSTICKS accessories set 5-parts appeared first on Firstflex.

for cable pulling system with RTG Ø 6 mm

The catch hook is mainly used in combination with the RUNPOSTICKS to catch cables or wires. The catch hook is also suitable in combination with the RC2 inspection camera. Can also be used as a catching set in combination with the functional glider (Art.No. 20468) for tight bends.

The post Fishing hook 6mm thread stainless steel appeared first on Firstflex.

for cable pulling system with RTG Ø 6 mm

All catch hooks have been developed primarily for the RUNPOSTICKS in order to cope with the most varied situations in cable installation. The hooks can also be used for all fiberglass rods by RUNPOTEC (GF3 – GF15). Optimally suited: To catch loose pull-in straps or pull them towards you. To fish for cables or pipes that are in corners or against walls. As a small variant to the RUNPOTEC sliding hook to glide over various obstacles and fish for cables or pipes.

The post Fishing hook Set 4 pieces, 6mm thread stainless steel appeared first on Firstflex.

for cable pulling systems with RTG Ø 6 mm thread

Accessories for RUNPOSTICKS – 1x plastic coated steel cable 0.5 m length with RUNPOTEC RTG Ø 6 mm thread and starting bulb for magnet adhesion – holding force 1,5 kg. In combination with the ball magnet it is possible to locate or guide the steel rope to wall openings.
Optimal area of application: suspended ceilings, cable shafts, hollow walls, retroactive wiring of non-routed cables, underfloor shafts, bushings, loose sleeve connections etc.

The post Drag rope 0.5m + magnet starting head appeared first on Firstflex.

for fiberglass rod Ø 3mm, 4,5mm and 6mm

Practical as a fixing variant, e.g. for attaching cable pulling grip (sock), ropes, cables etc. Alternative to eyelets => higher cable capacity. Suitable for GF3, RUNPOSTICKS, fiberglass rods Ø 4.5 mm and Ø 6 mm.

RUNP20427 pull loop Ø 2mm
RUNP20428 pull loop Ø 1.5mm

The post Pull loop stainless steel rope appeared first on Firstflex.

Accessories for cable pulling systems

Consists of 2 x initial bulbs for magnetic adhesion, 1 x magnetic ball Ø 10 mm with 1,5 kg holding force and 1 x magnetic ball Ø 14 mm with 2,9 kg holding force. Is screwed onto the tip of two push-in systems and can also be used as a catching set or for “fishing” with smaller pipe cross-sections (electric pipe Ø 16, 20, 25, 32 mm).

The post Magnet fishing-set 4-part 1.5 kg – 2.9 kg appeared first on Firstflex.

for fiberglass rod Ø 4,5, 6 mm, RUNPOSTICKS

For attaching cables, pulling wires or pulling ropes. Shackle for fiberglass rod Ø 4.5 mm, 6 mm or RUNPOSTICKS.

The post Shackle with RTG Ø 6 mm thread appeared first on Firstflex.

for fibreglass rods Ø 4,5 mm and 6 mm

For simplified sliding or rolling in empty pipes. The roller is compatible with fibreglass rod Ø 4.5 mm, 6 mm or for the RUNPOSTICKS. For RUNPOTEC RTG Ø 6 mm thread.

The post Roller Ø 24 mm with thread RTG Ø 6 mm appeared first on Firstflex.