Door Switches, Foot Switches, Float Switches & KwH Meters – Firstflex https://www.firstflex.co.nz Flexible Cable Specialists Thu, 04 Jun 2026 03:13:34 +0000 en-US hourly 1 https://wordpress.org/?v=4.9.29 https://www.firstflex.co.nz/wp-content/uploads/2020/07/cropped-FirstflexFavIcon-1-32x32.jpg Door Switches, Foot Switches, Float Switches & KwH Meters – Firstflex https://www.firstflex.co.nz 32 32 Single Phase DIN-rail watt-hour meter https://www.firstflex.co.nz/product/single-phase-din-rail-watt-hour-meter/ Wed, 05 Oct 2016 03:43:00 +0000 http://firstflex.hansoncms.com/product/single-phase-din-rail-watt-hour-meter/ PRODUCT FEATURES:
  • 35mm standard DIN rail installation, complying with standard DIN EN5002
  • 18mm width, complying with standard DIN43880
  • 5 + 1 digits display (99999.1kWh)
  • Analogue display for visibility in sunlight
  • Impulse output
  • Wire Size: 6mm2

TECHNICAL PARAMETERS:

Accuracy Class 1
Rated Voltage 230V
Rated Current 32A
Starting Current 0.4% lb
Insulation Performance AC Voltage 2kV for 1 minute impulse voltage 6kV

COMPLIANCE DOCUMENT:

KWH Meters Certificate of Compliance

The post Single Phase DIN-rail watt-hour meter appeared first on Firstflex.

]]> PRODUCT FEATURES:
  • 35mm standard DIN rail installation, complying with standard DIN EN5002
  • 18mm width, complying with standard DIN43880
  • 5 + 1 digits display (99999.1kWh)
  • Analogue display for visibility in sunlight
  • Impulse output
  • Wire Size: 6mm2

TECHNICAL PARAMETERS:

Accuracy Class 1
Rated Voltage 230V
Rated Current 32A
Starting Current 0.4% lb
Insulation Performance AC Voltage 2kV for 1 minute impulse voltage 6kV

COMPLIANCE DOCUMENT:

KWH Meters Certificate of Compliance

The post Single Phase DIN-rail watt-hour meter appeared first on Firstflex.

]]> Single Phase electronic watt-hour meter https://www.firstflex.co.nz/product/single-phase-electronic-watt-hour-meter/ Wed, 05 Oct 2016 03:45:25 +0000 http://firstflex.hansoncms.com/product/single-phase-electronic-watt-hour-meter/ PRODUCT FEATURES:
  • 35mm standard DIN rail installation, complying with standard DIN EN5002
  • LCD Display
  • Impulse output
  • 75mm wide
  • Wire Size: 25mm2

TECHNICAL PARAMETERS:

Accuracy Class 1
Rated Voltage 230V
Rated Current 100A
Starting Current 0.4% lb
Insulation Performance AC Voltage 2KV for 1 minute impulse voltage 6KV

COMPLIANCE DOCUMENT:

KWH Meters Certificate of Compliance

The post Single Phase electronic watt-hour meter appeared first on Firstflex.

]]> PRODUCT FEATURES:
  • 35mm standard DIN rail installation, complying with standard DIN EN5002
  • LCD Display
  • Impulse output
  • 75mm wide
  • Wire Size: 25mm2

TECHNICAL PARAMETERS:

Accuracy Class 1
Rated Voltage 230V
Rated Current 100A
Starting Current 0.4% lb
Insulation Performance AC Voltage 2KV for 1 minute impulse voltage 6KV

COMPLIANCE DOCUMENT:

KWH Meters Certificate of Compliance

The post Single Phase electronic watt-hour meter appeared first on Firstflex.

]]> Three phase electronic watt-hour meter https://www.firstflex.co.nz/product/three-phase-electronic-watt-hour-meter/ Wed, 05 Oct 2016 03:45:25 +0000 http://firstflex.hansoncms.com/product/three-phase-electronic-watt-hour-meter/ PRODUCT FEATURES:
  • 35mm standard DIN rail installation, complying with standard DIN EN5002
  • LCD Display
  • Impulse output
  • 125mm wide
  • Wire Size: 25mm2

TECHNICAL PARAMETERS:

Accuracy Class 1
Rated Voltage 3x230V/400V
Rated Current 3 x 100A
Starting Current 0.4% lb
Insulation Performance AC Voltage 2KV for 1 minute impulse voltage 6KV

COMPLIANCE DOCUMENT:

KWH Meters Certificate of Compliance

The post Three phase electronic watt-hour meter appeared first on Firstflex.

]]> PRODUCT FEATURES:
  • 35mm standard DIN rail installation, complying with standard DIN EN5002
  • LCD Display
  • Impulse output
  • 125mm wide
  • Wire Size: 25mm2

TECHNICAL PARAMETERS:

Accuracy Class 1
Rated Voltage 3x230V/400V
Rated Current 3 x 100A
Starting Current 0.4% lb
Insulation Performance AC Voltage 2KV for 1 minute impulse voltage 6KV

COMPLIANCE DOCUMENT:

KWH Meters Certificate of Compliance

The post Three phase electronic watt-hour meter appeared first on Firstflex.

]]> Foot Switch https://www.firstflex.co.nz/product/foot-switches/ Wed, 05 Oct 2016 03:40:37 +0000 http://firstflex.hansoncms.com/product/foot-switches/ Minimise employee safety risks and improve machine performance. Foot switches can be used to turn electrical equipment on and off with the foot.

PRODUCT FEATURES:

  • Made from robust cast aluminium construction, ensuring longevity.
  • Powder coated finish.
  • 85mm entry for steel capped boots.
  • Can be screwed to floor or placed for convenience.
  • Features gaskets and seals to prevent fluid intrusion.
  • Comes complete with gland entry.
  • Full range of spares also available.
  • 10 Amp 230 volt / 5 Amp 400 volt.
  • IP65

COMPLIANCE DOCUMENT:

Foot Switch Certificate of Compliance

The post Foot Switch appeared first on Firstflex.

]]> Minimise employee safety risks and improve machine performance. Foot switches can be used to turn electrical equipment on and off with the foot.

PRODUCT FEATURES:

  • Made from robust cast aluminium construction, ensuring longevity.
  • Powder coated finish.
  • 85mm entry for steel capped boots.
  • Can be screwed to floor or placed for convenience.
  • Features gaskets and seals to prevent fluid intrusion.
  • Comes complete with gland entry.
  • Full range of spares also available.
  • 10 Amp 230 volt / 5 Amp 400 volt.
  • IP65

COMPLIANCE DOCUMENT:

Foot Switch Certificate of Compliance

The post Foot Switch appeared first on Firstflex.

]]> Cupboard Door Switches https://www.firstflex.co.nz/product/cupboard-door-switches/ Wed, 05 Oct 2016 03:07:24 +0000 http://firstflex.hansoncms.com/product/cupboard-door-switches/
  • They have been architecturally designed for aesthetic appeal.
  • The screw heads are hidden by the caps supplied and camouflaged by attractive “star” embossing.
  • No manufacturer logo type imprints.
  • Easy screw terminations.
  • Pack includes spare block for sliding door applications.
  • Minimal size at just 55mm x 40mm x 25mm.
  • Unobtrusive in the home environment.

    • COMPLIANCE DOCUMENT:

    DSL & DSB Cupboard Door Switches Certificate of Compliance

    The post Cupboard Door Switches appeared first on Firstflex.

    ]]>
  • They have been architecturally designed for aesthetic appeal.
  • The screw heads are hidden by the caps supplied and camouflaged by attractive “star” embossing.
  • No manufacturer logo type imprints.
  • Easy screw terminations.
  • Pack includes spare block for sliding door applications.
  • Minimal size at just 55mm x 40mm x 25mm.
  • Unobtrusive in the home environment.

    • COMPLIANCE DOCUMENT:

    DSL & DSB Cupboard Door Switches Certificate of Compliance

    The post Cupboard Door Switches appeared first on Firstflex.

    ]]>         LS3031 https://www.firstflex.co.nz/product/ls3031/ Wed, 01 Jun 2022 20:58:09 +0000 https://www.firstflex.co.nz/product/ls3031/ Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS3031 appeared first on Firstflex.

    ]]>     Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS3031 appeared first on Firstflex.

    ]]>         LS3035 https://www.firstflex.co.nz/product/ls3035/ Wed, 01 Jun 2022 21:27:53 +0000 https://www.firstflex.co.nz/product/ls3035/ Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS3035 appeared first on Firstflex.

    ]]>     Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS3035 appeared first on Firstflex.

    ]]>         VS3035 https://www.firstflex.co.nz/product/vs3035/ Wed, 01 Jun 2022 21:48:49 +0000 https://www.firstflex.co.nz/product/vs3035/ Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post VS3035 appeared first on Firstflex.

    ]]>     Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post VS3035 appeared first on Firstflex.

    ]]>         LS8033 https://www.firstflex.co.nz/product/ls8033/ Wed, 01 Jun 2022 21:51:33 +0000 https://www.firstflex.co.nz/product/ls8033/ Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS8033 appeared first on Firstflex.

    ]]>     Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS8033 appeared first on Firstflex.

    ]]>         LS8035 https://www.firstflex.co.nz/product/ls8035/ Wed, 01 Jun 2022 22:04:20 +0000 https://www.firstflex.co.nz/product/ls8035/ Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS8035 appeared first on Firstflex.

    ]]>     Float Switches contain a reed switch with an actuator magnet in the float. Material is glass filled polypropylene or nylon 6.6 moulding. Contacts close when the magnet assembly reaches the centre line of the main body. Normally open or normally closed operations depend upon orientation, i.e if the magnet floats away or towards switch. Detects rise or fall of liquid, as well as liquid flow or predetermined volume. Design allows fitting to be achieved both as an internal operation or externally if necessary.

    Mechanical Specifications

    • Mounting position: Horizontal models +/- 30 degrees from horizontal
    • Minimum operating angle: Horizontal models 5 degrees from mounting angle
    • Maximum release angle: Horizontal models
    • 40 degrees from mounting angle
    • Shock*: 50g for 11 milliseconds duration
    • Vibration*: 35g up to 500 Hz
    • Nominal cable length: 0.5 metre

    *Reed Switch only

    Max.

    The post LS8035 appeared first on Firstflex.

    ]]>