Multi Core Flexible. Power Reeling Cable. EPR/PCP 0.6/1Kv 90°C. Tinned Copper. NSHTOU.

Conductor Annealed fine wires of tinned electrolytic copper stranded for HIGH flexibility VDE 0295 Class 5 Insulation EPR Rubber R90 Sheath PCP Elastomer Rubber and inner covering of tape under inner sheath of PCP Elastomer Rubber with Synthetic Yarn for anti-twisting protection

Temperature Range Fixed -40 to 90°C / Flexing -25 to 90°C Rated Voltage Uo/U 0.6/1Kv Max AC Operating Voltage Uo 0.7Kv Minimum Bending Radius Fixed 7.5 x cable diameter / Flexing 10 x cable diameter Sheath Colour Black Standard Core Colour 4 core - Blue, Brown, Black, G/Y. Multi core  Blk (numbered) + G/Y Maximum Conductor Temperature 90°C Other Flame retardant. UV Stabilised. Resistant to environmental factors like oxidation, ozone, sunlight. Very good behaviour to variations of outdoor temperature. Heat, oil and chemical resistant. Good tensile strength, tearing strength, and abrasion resistance Relevant Standards VDE 0250-814, VDE 0298-4, VDE 0298-3, IEC 60332-1, Generally to AS/NZS 5000:2003, CE Directive 72/23/EEC

Trailing cables are used for high mechanical stress applications, especially for frequent winding and unwinding with simultaneous tensile and torsional loads on cranes, building machinery, and conveyer shifts. A robust and all weather resistant cable for operations in mining and railway industries and in flexible handling equipment. Refer table below for applications. Other cables available on request.

During installation and operation the tensile stress must not exceed 15N/mm² and acceleration must not be more than 0.4M/sec. While in use 1 or 2 revolutions should remain on the operated drum. For reeling cables requiring higher tensile loads or for other applications please enquire with technical department.