• Hazardous Areas With correct explosion proof glands this cable can be installed in locations subject to Explosion Hazards rated 0.6/1Kv (DIN VDE0165).
  • Waste Water Treatment Plants Suitable for submersion in polluted liquids and aggressive environments.
  • Lighting & Entertainment With its extra durable CPE sheath this cable is suitable for outdoor temporary power supplies and lighting leads.
  • Marine Flexible Tinned Copper cable for installation in shipboard, pleasure crafts and other marine applications.
  • Power Used on constructions sites due to its outstanding flexibility and cable memory.
  • Pumping Suitable for permanent submersion to 500 metres
  • Materials and Handling Systems Suitable for Cable Spring Reelers and large Energy Chains
  • Conductor Annealed fine wires of tinned electrolytic copper stranded for HIGH flexibility VDE 0295 Class 5
  • Insulation EPR R90 Type E14 (to HD22) PETP - tape (over 16mm)
  • Sheath CPE Elastomer Rubber (IEP3 Equivalent 5GM3 according to DIN VDE 0207-21)
  • Temperature Range Fixed -40 to 90°C / Flexing -25 to 90°C
  • Rated Voltage Uo/U 300/500V HO5RN-F. Uo/U 0.6/1Kv HO7RN-F
  • Minimum Bending Radius Fixed 4 x cable diam. / Freely flexing 6 x cable diam. / Drag chains and reelers 10 x diam.
  • Sheath Colour Black.
  • Standard Core Colour
    2 core - Blue, Brown
    3 core - Blue, Brown, G/Y
    4 core - Brown, Black, GREY, Green/Yellow
    5 core - Blue, Brown, Black, GREY, Green/Yellow
    Multicore - Blk Numbered + G/Y
  • Maximum Conductor Temperature 90°C
  • Relevant StandardsDIN VDE 0295, DIN VDE 0207-20, DIN VDE 0207-21, IEC 60332-1, DIN VDE 0165, Generally to AS/NZS 5000:2003 & AS/NZS 60079, CE Directive 72/23/EEC
  • Tinned fine stranded copper conductor
  • Firstflex HO-Plus is rated for 90°C and has tinned conductors
  • For use in locations subject to Explosion Hazards rated 0.6/1kV (DIN VDE 0165)
  • UV Stabilised
  • Flame retardant
  • Heat, oil and chemical resistant (refer to chemical chart)
  • Water and moisture resistant
  • Resistant to environmental factors like oxidation, ozone and sunlight
  • Very good behaviour to variations of outdoor temperature
  • Good tensile strength, tearing strength and abrasion resistance
  • Good elongation at break
  • Good dielectric properties
  • Suitable for permanent submersion to 500 metres
 
> > Designed by RDGraphix 2008 < <