Flexible Multi Core Copper Braid Screened Rubber Energy Chain Cable. STPE/PUR 300/500V 80°C. Plain Copper. Coloured Cores.

Conductor Annealed fine wires of plain electrolytic copper stranded for EXTRA HIGH flexibility VDE 0295 Class 6 Insulation Special V75 SPVC with the cores stranded together in layers (if needed) while each layer has a different lay direction: 1st layer - left direction. 2nd layer - right direction. 3rd layer - left direction etc Inner Sheath STPE plus special fleece core wrapping over each layer Screening Tinned copper braid 85% minimum coverage Sheath Special PUR TMPU full polyurethane adhesion free

Temperature Range Fixed -50 to 80°C / Flexing -40 to 80°C Rated Voltage Uo/U 300/500v Max AC Operating Voltage Uo 318v Minimum Bending Radius Fixed 7.5 x cable diameter / Flexing 10 x cable diameter Sheath Colour Grey Standard Core Colours Coloured to DIN 47100 1.White 2. Brown 3.Green 4.Yellow 5.Grey 6.Pink 7.Blue 8.Red 9.Black 10.Violet 11.Grey-Pink 12.Red-Blue 13.White-Green 14.Brown-Green 15.White-Yellow 16.Yellow-Brown 17.White-Grey 18.Grey-Brown Maximum Conductor Temperature 80°C Other Flame retardant and UV Stabilised. High oil resistance especially to coolant emulsions and resistant to solvents, acids, alkalis and hydraulic liquidity. Heat, chemical, ozone, hydrolysis and conditionally microbe resistant. High abrasion and tear resistance Max. speed 4m/s Max. acceleration 10m/s² Max. cycle 5 million Relevant Standards VDE 0295 Class 6 (Conductor) VDE 0812 (Cores) IEC 60332-1, DIN 47100, Generally to AS/NZS 5000:2003, CE Directive 72/23/EEC

These special screened cables are designed for use where extreme flexibility and continuous movement is required, eg.energy/drag chains, or where tight bending radii are essential. These highly flexible energy chain cables with sliding abilities provide long service life with adhesion free and cut resistant PUR outer jacket. Screened to prevent external interference and as power control or signal cables on machines, portable tools, conveying equipment, variable speed drives and similar industrial applications requiring screened cables for EMC output. The screening should be earthed at both ends using EMC compatible glands that ensure contact around the complete circumference of the cable screening.See GK-EMC Glands and LN-EMC Locknuts.